Fuse box layout for a 2016 Subaru Outback
The 2016 Subaru Outback uses two primary fuse panels: an under-hood fuse and relay box in the engine compartment and an interior fuse panel behind the lower dashboard cover. Together, these panels protect the vehicle’s lighting, power accessories, engine controls, audio equipment, safety systems, and body electronics.
Fuse positions can vary slightly by engine, trim level, market, and optional equipment. A 2.5i, 3.6R, Limited, Touring, and models equipped with EyeSight or additional convenience features may not use every cavity. Always compare the fuse-box cover and owner’s manual with the vehicle before replacing a fuse.
Fuse panel locations
The engine-compartment fuse box is mounted near the battery and is protected by a snap-on cover. The underside of that cover normally includes a molded fuse map, relay identification, and spare-fuse storage. This panel handles many high-current and engine-bay circuits, including cooling fans, headlights, the alternator, ABS, and fuel injection.
The interior panel is located on the driver’s side, below the dashboard and close to the steering column. A small trim cover provides access. It contains many lower-amperage fuses for the radio, accessory sockets, HVAC controls, instrument cluster, power windows, door locks, and other cabin systems.
Common interior fuse assignments
The cabin fuse panel is the first place to inspect when a cigarette lighter, audio system, or interior accessory stops working. Subaru labels can use abbreviations such as CIGAR, AUDIO, IG, ECU, BKUP, and UNIT. The abbreviation is often more useful than the fuse’s physical position because numbering may differ between regional diagrams.
Commonly referenced interior circuits include the following:
| Fuse label or circuit | Typical rating | Protected equipment |
|---|---|---|
| CIGAR | 20 A | Front accessory power socket and cigarette-lighter circuit |
| AUDIO | 15 A | Radio, head unit, and related audio equipment |
| IG A-1 | 15 A | Ignition-switched body and control circuits |
| IG A-2 | 7.5 A | Ignition and accessory electronics |
| IG B-1 | 7.5 A | Meter, control, or body electrical functions |
| A/C IG | 7.5–10 A | Air-conditioning control and HVAC electronics |
| BKUP | 7.5–10 A | Memory, backup, or constant-power circuits |
| DOOR | 15–20 A | Door-lock or body-control functions |
These ratings are representative references rather than a substitute for the printed diagram. For example, an accessory socket may share a circuit with another cabin outlet, while a power-window fuse may be assigned to a separate high-current position. Do not install a higher-rated fuse to prevent repeated failures.
Engine compartment fuse layout
The under-hood panel generally includes separate left- and right-side headlamp circuits, often identified with labels such as H/L HI RH, H/L HI LH, H/L LO RH, and H/L LO LH. Other positions commonly protect the horn, engine management, backup power, radiator fans, fuel pump, ABS or Vehicle Dynamics Control, and main power feeds.
A typical 2016 Outback diagram may show several 7.5 A and 10 A lighting fuses, 15 A or 20 A control-system fuses, and larger 30 A to 40 A circuits for motors, fans, or power distribution. Cartridge or bolt-down fuses may protect major feeds and should not be tested or replaced casually.
When a headlamp, cooling fan, or engine-control circuit fails, inspect the relevant fuse and its terminals. A fuse that looks intact can still have a hairline break, so verify continuity with a meter or test light while the circuit is de-energized as appropriate. If the replacement opens immediately, the vehicle has an underlying short, overloaded component, or damaged wiring.
Reading the diagram correctly
Fuse numbers are not always arranged in a simple left-to-right sequence. The diagram may identify a cavity by number, label, amperage, or a combination of these. Start by matching the panel location, then confirm the number and rating printed on the cover. Online wiring references are helpful when the cover is missing, but the vehicle’s original documentation remains the final reference for its exact equipment package.
A blown fuse should be replaced only with the same type and amperage. Standard blade fuses, low-profile fuses, cartridge fuses, and fusible links are not interchangeable simply because they fit physically. Disconnecting the negative battery cable may be appropriate for some repairs, but it can erase settings or require initialization of certain systems.
Lighting and accessory installations
The factory fuse panel is not a convenient place to add a high-current lighting load without proper circuit protection. An auxiliary light bar should use a correctly rated inline fuse, relay, suitable wire gauge, and a dependable chassis ground. The trigger wire can often be connected to a low-current switched source, but that source should not carry the lamp’s full operating current.
Before adding off-road or exterior lighting, review this LED light bar wiring guide for relay, fuse, and wide-voltage-driver considerations. Avoid probing airbag, ABS, or engine-control wiring when searching for an ignition signal, and protect any new wire passing through the firewall with a grommet.
Safe fuse-checking practices
Use a fuse puller or insulated pliers, switch the ignition off, and keep the replacement rating identical to the original. A digital multimeter set to continuity or resistance can confirm a failed fuse after removal. For a live voltage check, use the exposed test points on top of the fuse and compare both sides with the circuit energized.
- Match the fuse rating and physical type exactly.
- Check both fuse boxes before diagnosing a dead accessory.
- Inspect for corrosion, heat discoloration, loose terminals, or water intrusion.
- Trace the circuit if a new fuse fails again immediately.
- Record the original fuse position before removing several fuses.
The 2016 Subaru Outback fuse layout is most useful when treated as a circuit map rather than a list of replacement slots. Locate the correct panel, identify the labeled circuit, verify the amperage, and investigate the cause of any repeated fuse failure. Use the vehicle-specific cover diagram alongside a trusted wiring reference to service the electrical system safely and accurately.